Reduce production time per piece

// Best chip removal

// No scattering or spray loss

// Ideal cooling of the cutting edge

// Cost-friendly retrofit of existing driven tooling systems 

All rights reserved ©REGO-FIX AG  2018

Internal cooling made easy

// For static and driven tools

// For ER sizes 11, 16, 20, 25, 32, 40

// Speeds up to 12,000 rpm

// Coolant pressures up to 150 bar

// For emulsion and oil coolants

Internal cooling

made easy

Customer Testimonial

        By retrofitting our non-through coolant driven tools with the reCool system, we are able to protect our original investment and carry out through-coolant machining on our CNC lathes.

During deep hole drilling, the addition of the reCool system eliminates the need to reduce cutting speed or add extra pecks to the drilling cycle, in order to improve tool life due to coolant not getting to the cutting point. The system allows us to use the correct cutting data during drilling and milling processes, which also improves tool life and cycle times. And, by getting coolant to the cutting tip, reCool helps with chip evacuation from the cutting area."

Paul Adams

Workshop Manager of McBraida PLC

"

// Reduced production time per piece

// Best chip removal

// No scattering or spray loss

// Ideal cooling of the cutting edge

// Short design: optimising machining range

// For static and driven tools with inner thread

// For ER sizes 16, 20, 25, 32

// Speeds up to 12,000 rpm

// Coolant pressures up to 100 bar

// For emulsion and oil coolants

Reduce production time per piece

// Best chip removal

// No scattering or spray loss

// Ideal cooling of the cutting edge

// Cost-friendly retrofit of existing driven         
   tooling systems

// New fpr high-speed spindles

// For high-speed driven tools and spindles

// For ER sizes 11, 16 & ERM 11 & 16

// Speeds up to 40,000 rpm

// Coolant pressures up to 100 bar

// For emulsion and oil coolants